Fangzhan RHF-I gas-tight chemical protective clothing heavy duty chemical suit
Chemical protective clothing is specially designed to protect human from being damaged by chemicals.
The suit is made by brocade silk cloth which is flame resistant and double coated with flame-retardant plastic surface. When in fire, it’s only charring, insoluble and maintaining good strength. The suit includes suit, gloves and boots.
1. Specification dimension:
2. Main parameters:
|1||Penetration time||98％H2S04, 30％HCL,60％HN03, 40%NaOH||>240min|
|2||Strength decrease rate||Vertical 98％H2S04, 30％HCL,60％HN03, 40%NaOH|
Zonal 98％H2S04, 30％HCL,60％HN03, 40%NaOH
|3||Seam breaking strength||Ambient temperature:20℃±2℃|
|4||Splashing liquid tightness||Instructions on clothing stains total area should not exceed three times the area of standard stains||No obvious stains|
|5||Ejection liquid tightness||Instructions on clothing stains total area should not exceed three times the area of standard stains||No obvious stains|
After 100 laps wear
|7||Flex resistance||Ambient temperature:20℃±2℃|
Flex 1000 times
|8||Puncture resistance||Ambient temperature:20℃±2℃|
3. Rubber boots performance:
|1||Shoes upper tensile properties Elongation at break (%)||>450|
|2||Soles puncture resistance Piercing (N)||>900|
|3||Soles wear-resisting property Abrasion loss (cm3/1.61km)||<0.9|
|4||Oil resistance (%) shoes upper soles||-2~10|
|5||Adhesion performance (N/m)||>600|
|6||Anti-aging properties (%)||>75|
|7||Electrical insulation properties Breakdown voltage (V)||>5000|
|8||Soles thermal insulation surface temperature rises less than (℃）||<22|
|9||Anti-slip properties Beginning slip angle (°）||>15|
4. Wearing Description
- Prop the open place of the frock, stretch feet into the trousers to put on the boots, neaten the clothing and lift it to the waist, then stretch arms into the sleeves.
- Put on the chemical protective hat, neaten the chest protective cloth of the frock, cover the chest protective cloth after folding it, and press snap fastener on the chest down.
- Neaten the hood, coil the elastic band around the neck, and press down the metal snap fastener at the suitable place.
- Neaten the girdle, and tighten it till you feel comfortable.
- Put on the gloves, and the gloves should be between two layers of sleeves. The way is as follows: Evert first layer of the sleeve of the chemical protective clothing, and then let the glove edge outside the inner sleeve of the chemical protective clothing, put down the first layer of the sleeve of the chemical protective clothing to clamp the glove between two layers of sleeves.
- If a breathing apparatus or gas mask is necessary for protecting your breathing, then the mask should stick to users face tightly and airproof as wearing it.
There are no reviews yet.